9 Best Two-Handle Pull-Down Kitchen Faucets (November 2026)
The best two-handle pull-down kitchen faucets include the Pfister Hanover Kitchen Sink Faucet with Pull for traditional kitchens, the Hurran 8" 2-Handle Pull Down Kitchen Faucet for brushed nickel sink upgrades, and the Peerless Single-Handle Kitchen Sink Faucet (best single-handle alternative).
On this page (3 sections)
The best two handle pull down kitchen faucet for most homes is the Pfister Hanover, because it combines separate temperature controls with a high-arc pull-down sprayer, swiveling reach and flexible 3- or 4-hole installation. Choose Hurran for brushed nickel stainless steel, or GICASA when a longer sprayer reach matters most.
That short answer works for most traditional kitchens, but the right choice still depends on the sink you already have. Hole count and spacing decide which models can be fitted without changing the countertop.
We compared the listed materials, handle layouts, installation patterns, spray functions, spout movement and stated reach. A two-handle faucet gives you independent hot and cold adjustment, while a pull-down head helps direct water around the sink.
Separate handles suit cooks who like to set temperature in deliberate steps. One handle is opened for warm water, the other is adjusted until the mix feels right, then both stay in place during rinsing.
A pull-down head suits busy sinks where the fixed spout cannot reach every corner. You can pull the sprayer down, aim it at a pan, and return it to the spout when the task is done.
The high arc matters for tall pots and large mixing bowls. Extra height creates room to slide a container under the spout, while swivel movement helps you shift the flow toward the basin you are using.
Spray and stream modes cover different jobs. Stream fills a kettle or pot with a steady flow, and spray loosens food from plates or rinses vegetables more quickly.
Installation flexibility is another reason the Hanover leads this list. Support for 3- or 4-hole decks means it can replace more existing setups than a single-hole design.
Finish should be checked early because it changes the tone of the whole sink area. Tuscan Bronze feels warm and traditional, while brushed nickel looks cooler and more modern.
Soap dispensers are included with some models, which can make an unused fourth hole more useful. A coordinated dispenser keeps liquid soap off the counter and matches the faucet finish.
Reach figures need a careful reading because brands measure them differently. Some state spout reach, others state hose or tube length, so compare the numbers with the size of your basin.
If you're still deciding between faucet styles, start with our kitchen faucet buying guide. Readers who want two handles without a pull-down head can also compare the best two handle kitchen faucet.
Two handles also change daily care in a small way. Each lever can be wiped and checked on its own, and the separate controls make it easier to notice if one side feels stiff.
A pull-down hose needs space under the counter as well as in the sink. Check that the hose can move and return without catching on stored items below the deck.
Water flow also deserves attention before you order. The listed flow rates in this group vary, and that can affect how quickly a pot fills at home pressure.
The sections below break down each model by layout, finish and stated reach. Use them to match the faucet to your sink first, then to your preferred look.
Our picks at a glance
-
1
Best for traditional kitchensPfister Hanover Kitchen Sink Faucet with Pull
9.7/10 our score
See it on Amazon -
2
Best for brushed nickel sink upgradesHurran 8" 2-Handle Pull Down Kitchen Faucet
9.5/10 our score
See it on Amazon -
3
Best single-handle alternativePeerless Single-Handle Kitchen Sink Faucet
9.3/10 our score
See it on Amazon
- 4
Check itGICASA Bridge Kitchen Faucet with Pull Down
Best for long sprayer reach - 5
Check itFROPO 2 Handle Kitchen Faucet with Pull
Best for high-arc clearance - 6
Check itENCMY Kitchen Faucet with Pull Down Sprayer
Best for spray-mode variety - 7
Check itDelta Windemere Brushed Nickel Kitchen Faucet
Best for 4-hole traditional layouts - 8
Check itHOTIS HOME Brushed Nickel Kitchen Sink Faucet
Best for compact sink spaces - 9
Check itHurran 2-Handle Kitchen Faucet with Pull-Out Sprayer
Best for long side-sprayer reach
The best two-handle pull-down kitchen faucets for each sink setup
The Pfister Hanover is the best overall fit, while Hurran and GICASA serve different installation and reach needs. The Peerless model is included as a single-handle comparison because some buyers may decide that two handles are not essential.
That mix is deliberate because a roundup should show close alternatives as well as clear trade-offs. Some readers will value two handles and a pull-down head, while others will prefer one simple lever.
Start with your sink layout before you compare finishes or spray modes. Hole count, spacing and countertop thickness can rule out several models at once.
Then look at reach and spray function for the tasks you do most. A longer hose helps with wide basins, while a simple stream and spray pair may be enough for everyday rinsing.
Finish and included extras come next, including soap dispensers, deck plates and supply lines. Those details affect both the look of the deck and what you may need to buy for installation.
The picks that follow are ordered around those practical questions. Each entry explains who it suits, what the stated specs mean in daily use, and where the honest limits sit.
Pfister Hanover Kitchen Sink Faucet with Pull: Best for traditional kitchens
- 2-handle high-arc design
- Pull-down spray and stream modes
- 3- or 4-hole installation
- Soap dispenser included
- Tuscan Bronze finish
The Pfister Hanover combines separate hot and cold controls with a high-arc pull-down sprayer, swiveling spout and coordinating soap dispenser.
Pros
- Pull-down sprayer with spray and stream modes
- High-arc swiveling spout
- 3- or 4-hole installation
Cons
- Bronze finish may not suit every kitchen
- Needs a compatible multi-hole countertop
The Pfister Hanover is the strongest all-around match for a traditional kitchen that has room for a high-arc faucet. Its 2-handle design keeps hot and cold control separate, while the pull-down head offers spray and stream modes.
The high-arc spout swivels, which helps when you need to move the water path across the sink. Pfister also includes a coordinating soap dispenser, so the faucet can support handwashing and dish cleanup without using a separate counter bottle.
Installation is flexible for a multi-hole sink. The faucet supports 3- or 4-hole installation, uses deck mounting, and includes TiteSeal mounting technology, a Quick Install Tool, and connection parts described in the product details.
The Tuscan Bronze finish gives this pick a warmer traditional look than the brushed nickel options below. Its stated flow rate is 1.8 gpm, and Pfister identifies the Hanover as model F5314HNY.
Choose it when you want a classic finish, independent controls and a pull-down head in one setup. Check your countertop holes before ordering because the layout is not designed for a single-hole installation.
Hurran 8" 2-Handle Pull Down Kitchen Faucet: Best for brushed nickel sink upgrades
- 2-handle temperature control
- 8-inch high-arc spout
- 360-degree swivel
- 3- or 4-hole compatibility
- Soap dispenser included
Hurran offers separate hot and cold handles, a high-arc 2-in-1 sprayer and brushed nickel stainless steel construction for common 3- or 4-hole layouts.
Pros
- 3- or 4-hole sink compatibility
- Stream and spray modes
- 360-degree swivel
Cons
- 8-inch spout reach is shorter than GICASA's stated pull-out tube length
- A widespread layout still needs careful hole-spacing checks
Hurran is a strong choice for a brushed nickel upgrade where the sink has either 3 or 4 holes. Its 8-inch high-arc spout gives clearance for tall pots, while the 360-degree swivel and pull-down hose help cover the sink.
The 2-in-1 head switches between a steady stream and a wide spray. That split makes sense for two common tasks: filling a container with a controlled stream, then rinsing food or dishes with the wider pattern.
The faucet uses SUS304 stainless steel with a brushed nickel finish. Hurran also identifies it as lead-free certified to NSF/ANSI 372 and compliant with SDWA standards.
A matching soap dispenser and deck plate are included.
The separate levers give you independent temperature control with clear hot and cold markings. Hurran describes the faucet as suitable for 3- or 4-hole setups, so measure the existing holes and countertop before choosing the installation arrangement.
Choose this model when brushed nickel, a 2-function head and a coordinated soap dispenser matter more than a very long hose.
Peerless Single-Handle Kitchen Sink Faucet: Best single-handle alternative
- Single-handle lever
- 360-degree swivel
- 3-hole, 8-inch configuration
- Chrome finish
- 1.5 gpm flow rate
Peerless is the outlier in this roundup, using one lever and a low-arc swiveling design instead of two handles and a pull-down sprayer.
Pros
- Simple single-lever control
- 360-degree swivel
- 3-hole, 8-inch installation
Cons
- Not a two-handle faucet
- No pull-down sprayer
Peerless is the comparison pick for shoppers who may prefer one lever over two handles. Its single-handle design makes hot-to-cold adjustment simple, but it does not have the pull-down sprayer that defines the other leading options here.
The low-arc spout swivels 360 degrees for everyday sink movement. Its chrome finish and brass material give it a different look and feel from the stainless steel brushed nickel models in this roundup.
Installation is designed for a 3-hole, 8-inch configuration. A deck plate and handle are included, and the faucet has a stated flow rate of 1.5 gpm.
Peerless also identifies the model as P110LF and includes a lifetime limited faucet and finish warranty. Those details make it worth considering when your priority is a familiar single-lever layout rather than independent handles and pull-down reach.
Choose it only if you are open to a single-handle faucet. For a true two-handle pull-down design, move up to Pfister, Hurran or FROPO.
GICASA Bridge Kitchen Faucet with Pull Down: Best for long sprayer reach
- 8-inch centerset, 2-handle design
- 20-inch pull-out tube
- 3-function sprayer
- 360-degree swivel spout
- Brushed nickel stainless steel
GICASA stands out for its 20-inch pull-out tube, 3-function sprayer and 360-degree swivel spout, with separate controls in an 8-inch layout.
Pros
- Longest stated sprayer reach here
- 3-function sprayer
- 360-degree swivel
Cons
- The title describes a pull-down sprayer while the bullets describe a pull-out tube
- 3-hole installation requires compatible spacing
GICASA is the reach-focused option. Its 20-inch pull-out tube gives you more stated extension than the other integrated sprayers in this group, while the 360-degree swivel spout helps direct water around a busy sink.
The faucet has two handles in an 8-inch centerset layout and uses brushed nickel SUS304 stainless steel construction. Its 3-function sprayer adds more water patterns than the simpler 2-function options, including a blade water mode described for rinsing food debris.
The 20-inch tube can help when you need to move the sprayer well beyond the base of the faucet. That extra reach is useful for rinsing across a wide basin or guiding water toward a nearby container.
There is one naming detail to check. The title uses pull-down wording, while the feature description calls the hose pull-out.
Review the exact design shown for the version you plan to order if that distinction affects your preference.
Choose GICASA when reach and spray variety matter most, and when your sink has a compatible 3-hole deck-mount layout.
FROPO 2 Handle Kitchen Faucet with Pull: Best for high-arc clearance
- 2 independent hot and cold handles
- High-arc pull-down sprayer
- 2 spray modes
- 360-degree swivel
- Brushed nickel finish
FROPO pairs separate temperature controls with a gooseneck high-arc spout, two spray modes and a brushed nickel finish.
Pros
- Independent hot and cold adjustment
- High-arc clearance
- 360-degree swivel
Cons
- The included component listed is a deck plate
- 3-hole widespread installation needs a matching sink layout
FROPO suits a kitchen that needs high-arc clearance and separate temperature adjustment in a brushed nickel finish. Its dual-handle design lets you set hot and cold water independently, while the gooseneck spout leaves more room for tall pots.
The pull-down sprayer has two modes for filling, rinsing and general dish cleanup. The spout also swivels 360 degrees, which helps direct water to different areas of the basin without moving the whole faucet.
FROPO uses a brushed nickel finish and describes the faucet as lead-free brass with ceramic disc cartridges. The product data also identifies stainless steel as the material type, so check the exact construction details if material terminology is a deciding factor.
The faucet is a deck-mount, 3-hole widespread installation and includes a deck plate. Its stated dimensions are 8.42 in deep, 4.5 in wide and 16.52 in high.
Choose FROPO when you want a high-arc profile and independent controls but do not need three spray modes or a separate soap dispenser.
ENCMY Kitchen Faucet with Pull Down Sprayer: Best for spray-mode variety
- 3 spray modes
- 18-inch pull-down reach
- 360-degree swivel
- 2 handles
- 3-hole, 8-inch setup
ENCMY gives you waterfall, stream and sweep modes, an 18-inch sprayer reach and separate hot and cold controls for a 3-hole, 8-inch setup.
Pros
- Three spray modes
- 18-inch pull-down reach
- 360-degree swivel
Cons
- Hole spacing and countertop thickness need checking
- Only an aerator is listed as an included component
ENCMY is the best fit for shoppers who want more spray choices in a standard-looking brushed nickel faucet. It offers waterfall, stream and sweep modes, along with an 18-inch pull-down reach and a 360-degree swivel spout.
The two handles control hot and cold water separately. That arrangement can feel more deliberate than a single lever when you want to adjust temperature and flow in separate steps while washing vegetables, filling pots or rinsing dishes.
ENCMY is designed for a 3-hole, 8-inch kitchen sink setup. The product data says to check hole spacing and countertop thickness before purchase, which is especially useful for replacements where the existing sink has a thick deck.
The faucet has stainless steel construction, a brushed nickel finish and a stated flow rate of 1.8 gpm. An aerator is listed among the included components, and the faucet uses deck mounting.
Choose ENCMY when three spray modes are more useful to you than a soap dispenser or a 4-hole installation option.
Delta Windemere Brushed Nickel Kitchen Faucet: Best for 4-hole traditional layouts
- 2-handle design
- Side sprayer
- 4-hole, 8-inch center installation
- 360-degree swivel
- Lifetime limited faucet and finish warranty
Delta Windemere suits a traditional 4-hole sink with two handles and a separate side sprayer, rather than an integrated pull-down head.
Pros
- Fits 4-hole, 8-inch centers
- Side sprayer included
- 360-degree swivel
Cons
- Side sprayer is separate from the main spout
- Not a pull-down sprayer design
Delta Windemere is the right choice for a traditional 4-hole, 8-inch center sink that already uses a separate side sprayer. It has two handles and a 360-degree swivel, but its sprayer is not pulled down from the main spout.
The separate side sprayer can still cover common rinsing tasks. Its layout may also make sense when the countertop already has a dedicated sprayer hole and you want to keep the existing configuration.
Delta states that the cartridge valve is tested for at least 500,000 uses and that the Brilliance finish is tested for corrosion resistance. It also identifies the faucet as lead-free compliant and backs it with a lifetime limited faucet and finish warranty.
The faucet has a 1.8 gpm flow rate and a brushed stainless finish. It is deck mounted, with dimensions of 8 in deep, 10.25 in wide and 11.63 in high.
Choose Windemere when a 4-hole traditional layout matters more than an integrated pull-down head. If you want a Delta model with two handles and a pull-down design, compare our best Delta two handle kitchen faucet guide.
HOTIS HOME Brushed Nickel Kitchen Sink Faucet: Best for compact sink spaces
- 2 handles
- High-arc 360-degree swivel spout
- 3-hole installation
- 3.94-inch spout reach
- Brushed nickel stainless steel
HOTIS HOME offers two-handle control and a compact high-arc swivel spout, but it does not include a pull-down sprayer and its supply lines are not included.
Pros
- Compact stated dimensions
- 360-degree rotation
- 3-hole deck mount
Cons
- No pull-down sprayer
- Supply lines are not included
HOTIS HOME is a compact two-handle option for a 3-hole sink, but it does not meet the pull-down requirement. Its high-arc spout rotates 360 degrees, and the stated overall height is 6.1 inches with a 3.94-inch reach.
The stainless steel faucet has a brushed nickel finish and ceramic disc valve. Separate left and right levers provide hot and cold control, while the high-arc shape leaves room for ordinary sink work.
The product includes a deck plate, handle and sprayer, but the installation note says hot and cold supply lines are not included. Plan for that before starting a replacement project.
Its stated flow rate is 2 gpm, the highest in this group. That figure should be compared with your home's needs and local requirements, especially if water use is a priority.
Choose HOTIS HOME when compact dimensions and two-handle control matter more than an integrated pull-down sprayer. Measure your sink and countertop carefully because the short spout reach may not cover a wide basin.
Hurran 2-Handle Kitchen Faucet with Pull-Out Sprayer: Best for long side-sprayer reach
- 2-handle hot and cold control
- 35-inch pull-out side sprayer
- 8-inch high-arc spout
- 360-degree rotation
- 4-hole installation
This Hurran uses a separate pull-out sprayer with about 35 inches of reach, making it a practical match for a compatible 4-hole sink.
Pros
- About 35-inch sprayer reach
- 360-degree high-arc rotation
- Separate hot and cold controls
Cons
- Pull-out side sprayer is not integrated into the spout
- Designed for 8-inch, 4-hole sinks
This Hurran is the long-reach alternative for a 4-hole sink. Instead of an integrated pull-down head, it uses a separate pull-out side sprayer that extends about 35 inches.
The 8-inch high-arc spout rotates 360 degrees, giving you room to move cookware and direct the main flow. Separate hot and cold handles make temperature adjustment straightforward, with clear markings intended to help prevent accidental burns.
The faucet uses SUS304 stainless steel with a matte black finish and is described as lead-free certified to NSF/ANSI 372 and compliant with SDWA standards. Its deck-mounted design is made for 8-inch, 4-hole sinks.
Installation hardware is included. Hurran also notes that the sink-hole adapter thickness should not exceed 2 in, so measure the mounting area before ordering.
Choose this model when you want matte black styling and a very long separate sprayer. Choose the brushed nickel Hurran above if an integrated pull-down head is more important.
How to choose a pull-down kitchen faucet with two handles
Start with the sink holes because installation compatibility can eliminate a faucet before finish or spray features matter. The products here use 3-hole, 4-hole, 8-inch and widespread layouts, so measure the existing deck and hole spacing.
If your sink has an open unused hole, a soap dispenser can make the layout more useful. Pfister and the brushed nickel Hurran include coordinating soap dispensers, while other models use a deck plate or separate sprayer arrangement.
Should you choose a two-handle kitchen faucet pull-down design?
Choose a two-handle kitchen faucet pull-down design when you want separate hot and cold controls and a sprayer that returns to the main spout. That combination is useful for readers who prefer deliberate temperature adjustment and direct sink coverage.
A single-handle faucet is simpler if you want one lever for temperature and flow. Our guide to single handle pull out kitchen faucets covers that different layout.
How much sprayer reach do you need?
Match reach to the size and shape of your sink. GICASA states a 20-inch pull-out tube, ENCMY states an 18-inch pull-down reach, and the black Hurran has a separate side sprayer that extends about 35 inches.
Longer reach is helpful for wide basins, large cookware and rinsing near the sink edge. It also needs enough room beneath the counter for the hose path and weight, so check the installation space before connecting the water lines.
Which finish works best for daily kitchen use?
Brushed nickel and brushed stainless finishes can suit kitchens where fingerprints and water spots are a concern, while Tuscan Bronze and matte black create stronger color contrast. Finish choice should also match the sink, cabinet hardware and soap dispenser.
A brushed surface tends to hide small marks better than a polished chrome finish. That does not remove the need for wiping, but it can make the faucet look tidier between cleans.
Tuscan Bronze adds warmth to a traditional kitchen with matching hardware. It works best when the sink, handles and any dispenser share a similar tone.
Matte black makes a stronger visual statement and suits darker cabinets or stone. It can also show dust and pale water marks, so it needs regular wiping to keep its contrast.
Brushed nickel sits between those options in most kitchens. It pairs well with stainless appliances and a neutral countertop without demanding an exact match elsewhere.
Think about the whole sink area rather than the faucet alone. A new finish may look fine on its own but clash with taps, a soap dispenser or cabinet pulls nearby.
Care also depends on finish. Use a soft cloth and mild cleaner, and avoid abrasive pads that can dull the surface over time.
For a broader finish comparison, see our guide to the best stainless steel pull down kitchen faucet. The Pfister Hanover is the warmest-looking option here, while Hurran, FROPO, ENCMY and GICASA use brushed finishes.
Check the finish name on the exact version you order. Similar names can describe different tones, and photos may not capture the colour under your kitchen lighting.
If you plan to keep the sink, let the faucet finish lead the update in a small way. A coordinated dispenser or deck plate can tie the parts together without a full remodel.
Warranty and material details matter alongside appearance. A durable finish should resist corrosion and daily wiping, which is why the stated construction is worth reading for each model.
What should you check before installation?
Confirm the hole count, hole spacing, countertop thickness, mounting style and included connection parts. HOTIS HOME does not include hot and cold supply lines, while other products list installation hardware, a deck plate, or connection parts.
Turn off the water supply before removing an old faucet. Follow the instructions for the exact model, secure the mounting hardware, connect hot and cold lines correctly, and check for leaks before placing items beneath the sink.
Verdict: which two-handle pull-down faucet should you choose?
The Pfister Hanover is the best overall choice for a traditional kitchen that needs two handles, a high-arc pull-down sprayer, spray and stream modes, and flexible 3- or 4-hole installation.
It suits homes where separate hot and cold controls are a priority. The high arc gives room for tall pots, and the swivel helps move water across a busy sink.
Pick the Hurran brushed nickel model for a stainless steel look, 3- or 4-hole compatibility and a coordinating soap dispenser. Its 8-inch high-arc spout and 360-degree swivel give practical clearance for filling and rinsing.
Choose GICASA when the stated 20-inch tube and 3-function sprayer are more important than a simple 2-mode head. That longer reach can help with wide basins and large cookware, provided your 3-hole deck layout matches.
FROPO and ENCMY are worth weighing for high-arc clearance and spray variety. FROPO keeps two modes and independent handles, while ENCMY adds waterfall, stream and sweep modes with an 18-inch reach.
Choose Delta Windemere or the black Hurran when your sink already has a 4-hole layout. Delta uses a separate side sprayer, and the black Hurran offers about 35 inches of side-sprayer reach in matte black.
HOTIS HOME fits compact spaces with two handles and a short 3.94-inch reach. It is not a pull-down design, and supply lines are not included, so plan for those gaps before ordering.
If you prefer one lever, the Peerless is the clearest alternative, but it is not a two-handle pull-down kitchen faucet. Its low-arc swivel and single handle suit a simpler layout and a 3-hole, 8-inch sink.
Before you buy any of them, measure hole count, spacing and countertop thickness. Also check which parts are included, from deck plates and soap dispensers to hoses and supply lines.
That final check protects against the most common replacement problem in this group. A faucet that matches your sink layout will look right, fit correctly and be far easier to install.
Our top 3 picks at a glance
-
1
Best for traditional kitchens
Pfister Hanover Kitchen Sink Faucet with Pull
9.7/10 our score
See it on Amazon -
2
Best for brushed nickel sink upgrades
Hurran 8" 2-Handle Pull Down Kitchen Faucet
9.5/10 our score
See it on Amazon -
3
Best single-handle alternative
Peerless Single-Handle Kitchen Sink Faucet
9.3/10 our score
See it on Amazon
Frequently asked questions
What is the best two handle pull down kitchen faucet?
The Pfister Hanover is the strongest overall match because it combines two handles, a high-arc pull-down sprayer, spray and stream modes, a swiveling spout, and 3- or 4-hole installation. Hurran is another strong choice for a brushed nickel 3- or 4-hole setup.
Why choose a two-handle pull-down kitchen faucet?
A two-handle pull-down kitchen faucet gives you separate hot and cold controls plus a sprayer that pulls from the spout. That layout suits people who want more independent temperature adjustment while still needing reach for rinsing dishes, filling pots and cleaning the sink.
Do two-handle pull-down faucets fit every kitchen sink?
No. Check the number of holes, hole spacing, countertop thickness and mounting style before ordering.
The products here range from 3-hole, 8-inch layouts to 4-hole installations, while some include a soap dispenser or deck plate that changes how the setup is arranged.
What is the difference between pull-down and pull-out sprayers?
A pull-down sprayer extends from the faucet spout, while a pull-out sprayer usually pulls toward you from a separate or differently shaped faucet head. Pull-down designs often pair with high-arc spouts.
Pull-out designs can offer a longer reach, as shown by the Hurran model with about 35 inches.
