9 Best Two Hole Bar Sink Faucets (November 2026)
The best two hole bar sink faucets include the Ifaucet Black Bathroom Faucet 3 Hole for a black 3-hole alternative, the Delta Modern Matte Black Single Hole Bar for a flexible black finish, and the Friho Kitchen Faucet with Side Sprayer for side-sprayer cleanup.
On this page (6 sections)
The APPASO Bar Sink Faucet 4 Inch Centerset is the best bar sink faucet 2 hole pick because it has two handles, 4-inch centers, stainless steel construction and support for 2- or 3-hole setups. The RODDEX is another direct two-hole choice, while the other faucets suit different sink layouts.
Hole count sets what can be installed without drilling the counter or swapping the sink. A single-hole or four-hole faucet may look right in photos yet leave a gap or fail to cover an unused opening.
A two-hole faucet can save you from changing the countertop or adding an unnecessary deck plate. It can also keep water connections where the cabinet was already built to accept them.
Two handles let you set hot and cold water in small moves, which helps when filling a glass, rinsing a tool or topping up a pitcher. Finish and reach come next, but they should not move ahead of fit.
Before choosing, measure from the center of one mounting hole to the center of the other, not from edge to edge. Check hole diameter, basin depth, space below the sink and any shelf or cabinet above it.
For broader faucet basics, see our kitchen faucet buying guide. If you want more styles for a wet bar or prep sink, compare our best faucet bar sink picks.
Our picks at a glance
-
1
Best for a black 3-hole alternativeIfaucet Black Bathroom Faucet 3 Hole
9.7/10 our score
See it on Amazon -
2
Best for a flexible black finishDelta Modern Matte Black Single Hole Bar
9.6/10 our score
See it on Amazon -
3
Best for side-sprayer cleanupFriho Kitchen Faucet with Side Sprayer
9.5/10 our score
See it on Amazon
- 4
Best for a compact single-handle setupCheck it - 5
Check itAPPASO Bar Sink Faucet 4 Inch Centerset
Best for standard 2-hole bar sinks - 6
Check itCrea Kitchen Faucets with Pull Out Sprayer
Best for pull-out spray reach - 7
Check itCOMLLEN 2 Handle Kitchen Sink Faucet
Best for large-sink spray coverage - 8
Check itFORIOUS Matte Black Bathroom Faucet 1 Hole
Best for a two-pack - 9
Check itRODDEX Bathroom Sink Faucets 4 Inch Center
Best for a bathroom-style 2-hole fit
How we chose these 2 hole bar sink faucets
The best 2 hole bar sink faucet must match the hole count and spacing first. We compared installation type, centers, handle layout, materials, spout movement, spray features and included hardware.
Hole pattern came before style in every case. Two-hole models were judged on center measurement and mounting method, while other layouts were kept only where the sink could accept them.
We checked whether a mounting plate or deck plate was included. That part can decide if a faucet covers an extra hole or sits flat.
Supply lines and hardware were also checked. Missing parts can add cost and delay a simple replacement.
Handle layout shaped the shortlist as well. Two-handle faucets suit the direct two-hole replacement, while single-lever models were treated as alternatives for sinks with one hole or a compatible plate.
Spout movement was compared by stated swivel range and height. More movement can help in a tight bar area, but only when the spout still clears tall glasses and leaves room for hands under the stream.
Materials and finish were noted in plain terms, such as stainless steel construction or a brushed finish. That helps you think about cleaning and care, since some finishes show water spots more easily than others.
Our score weighs specs, features and buyer feedback against what you are shopping for. Products that are not direct two-hole matches remain only when they offer a useful alternative, such as a side sprayer, pull-out sprayer or flexible black finish.
Those alternatives were not treated as equal substitutes. A side sprayer can make rinsing easier, yet it may need three or four holes, so it suits a different sink from the start.
Flow rate and aerator details were also part of the comparison. A lower rate can feel gentler at a small sink, while a higher rate may fill a pitcher faster.
We paid attention to included items such as drains, hoses, sprayers and manuals. A bundle that includes a drain can be better value for a bathroom-style sink, while a kitchen-style pick may not need that part.
A two-hole sink does not automatically mean every centerset faucet will fit. Check center-to-center measurement, mounting-hole diameter and clearance before you order.
Clearance below the counter matters just as much as the holes on top. Supply lines can cross, mounting nuts can sit close to the basin, and a tight cabinet can make installation awkward.
We also checked overall height against typical bar settings. A tall spout can help with large pitchers but may crowd a low shelf, while a shorter spout may feel cramped for bigger items.
The final order reflects those priorities. Direct fit comes first, then handle control and spout reach, then spray features and finish.
That is why APPASO and RODDEX sit apart from the wider alternatives. They answer the two-hole question directly, while the other picks solve a different problem for a different sink.
| Product | Best for | Hole setup | Material | Spout reach | Our score |
|---|---|---|---|---|---|
| Ifaucet Black Bathroom Faucet 3 Hole | a black 3-hole alternative | 3-hole centerset | Stainless steel | 4.2 in | 9.7 |
| Delta Modern Matte Black Single Hole Bar | a flexible black finish | 1 hole; 1 or 3 with optional deck plate | Metal | 9.6 | |
| Friho Kitchen Faucet with Side Sprayer | side-sprayer cleanup | 3 or 4 holes; 8-in centerset | 304 stainless steel | 9.5 | |
| CREA Bar Sink Faucet | a compact single-handle setup | Single hole; 1 or 3-hole mount | Stainless steel | 9.2 | |
| APPASO Bar Sink Faucet 4 Inch Centerset | standard 2-hole bar sinks | 2 or 3 holes, 4-in centers | Stainless steel | 9.1 | |
| Crea Kitchen Faucets with Pull Out Sprayer | pull-out spray reach | Single hole | Stainless steel | 8.8 | |
| COMLLEN 2 Handle Kitchen Sink Faucet | large-sink spray coverage | 4 holes | Plastic and stainless steel | 7.08 in | 8.5 |
| FORIOUS Matte Black Bathroom Faucet 1 Hole | a two-pack | Single hole; deck plate supports 1 or 3 holes | Stainless steel | 8.3 | |
| RODDEX Bathroom Sink Faucets 4 Inch Center | a bathroom-style 2-hole fit | 2 holes, 4-in centers | Stainless steel | 8.1 |
Best two hole bar sink faucets by use
The APPASO and RODDEX are the direct two-hole choices in this group. The remaining picks are alternatives for sinks that can accept another hole pattern or for buyers who value spray reach over a direct replacement.
Ifaucet Black Bathroom Faucet 3 Hole: Best for a black 3-hole alternative
- Matte black stainless steel finish
- Two handles
- 1.2 gpm no-splashing aerator
- Copper pop-up drain
This is a 3-hole faucet rather than a direct 2-hole match, but its two-handle layout and matte black finish may suit a sink with the right configuration.
Pros
- Matte black finish
- Two-handle control
- Pop-up drain included
Cons
- Requires 3 holes
- Bathroom-focused design
The Ifaucet Black Bathroom Faucet 3 Hole is a strong choice when your sink has 3 holes and you want a matte black finish. Its two-handle centerset design gives separate hot and cold controls, while the stainless steel body suits a dark faucet theme.
The faucet measures 8.2 in overall height, with a 4.2-in spout reach and 5.1-in spout height. Those dimensions suit a compact basin better than a deep, wide kitchen sink.
A 1.2 gpm no-splashing aerator is designed to reduce water use, and the faucet includes a solid metal pop-up drain and certified water inlet hoses. The ceramic cartridge is described as supporting 500,000 drip-free cycles.
This is not a direct two-hole replacement. Pick it when the sink already has 3 holes and you want a black bathroom-style faucet with a drain included.
The shorter reach may feel tight for washing a tall pitcher or large item. Care is simple with a matte black finish, though it still needs a soft cloth and mild cleaning.
Delta Modern Matte Black Single Hole Bar: Best for a flexible black finish
- Matte black finish
- 360-degree swivel spout
- 1.5 gpm flow rate
- Fits 1 or 3 holes with optional deck plate
Delta offers a strong bar-faucet design, but it is not a two-hole faucet. Choose it only if your sink can accept a single-hole installation or a compatible 3-hole setup.
Pros
- 360-degree swivel
- Matte black finish
- Limited lifetime warranty
Cons
- Not a 2-hole design
- Deck plate sold separately
The Delta Modern Matte Black Single Hole Bar is best for a bar sink that accepts a single-hole faucet. For more Delta options for compact basins, see our Delta bar sink faucet guide.
Its 360-degree swiveling spout gives you more freedom to aim water across a compact prep basin.
Delta specifies a 1.5 gpm flow rate and a ceramic disc valve tested for at least 500,000 uses. The matte black finish is tested for corrosion resistance, and Delta backs the faucet with a limited lifetime warranty.
It can fit a 1-hole installation or a 3-hole, 4-in setup when paired with the optional RP103661 deck plate. That deck plate is sold separately, so confirm the sink layout and accessory needs first.
This is not a 2-hole faucet. Choose it when your sink can accept its single-hole format and you prefer a clean one-handle design.
Friho Kitchen Faucet with Side Sprayer: Best for side-sprayer cleanup
- Two handles
- 304 stainless steel
- High-arc 360-degree swivel spout
- Side sprayer
The Friho is useful when a side sprayer matters, but its 3- or 4-hole layout does not directly match a standard two-hole bar sink.
Pros
- Side sprayer
- Two-handle temperature control
- High-arc swivel spout
Cons
- Needs 3 or 4 holes
- Not a direct 2-hole fit
The Friho Kitchen Faucet with Side Sprayer suits a larger utility or bar sink where spray reach matters. Its two handles provide separate hot and cold control, while the high-arc spout swivels 360 degrees.
The faucet is made from 304 stainless steel with a brushed nickel finish. Friho describes the aerator as reducing water waste by 30% and balancing pressure to reduce splashing and noise.
Its side sprayer can reach sink corners and cookware, which is useful for rinsing after food preparation. The faucet uses an 8-inch centerset layout and is designed for 3- or 4-hole sinks, so it is not a direct two-hole fit.
Pick Friho when you have the required holes or are replacing a wider faucet set. For a standard 2-hole bar sink, choose APPASO or RODDEX instead.
The high arc helps with taller items under the spout, which is one reason this shape suits utility and laundry style sinks. The basin still needs enough depth to contain the spray.
The 8-inch spacing is the main limit here. Measure your holes first, because a wider centerset will not drop into a two-hole pattern without a change to the sink or counter.
CREA Bar Sink Faucet: Best for a compact single-handle setup
- 304 stainless steel
- Single lever
- 360-degree swivel
- 1.2 gpm flow rate
CREA gives you a compact bar-faucet shape and a 360-degree swivel, but it is a single-hole choice rather than a two-hole replacement.
Pros
- Compact design
- Lead-free 304 stainless steel
- 360-degree swivel
Cons
- Not a 2-hole faucet
- Single handle only
The CREA Bar Sink Faucet is best for a single-hole installation with a compact footprint. Its single lever controls flow and temperature together, and the 360-degree swivel helps cover more of a small basin.
The faucet uses lead-free 304 stainless steel with a brushed nickel finish. CREA describes its ceramic disc valve as supporting drip-free performance and 30% water savings.
It supports a single-hole or 3-hole mount and has a 1.2 gpm flow rate. The stated dimensions are 5.5 in deep, 2 in wide and 10.6 in high, so measure the space above the sink before choosing it.
This is not a two-hole faucet. Use it when your sink has one mounting hole or when you are replacing the sink and can select the hole layout.
The single lever can be easier to use with one hand, especially when your other hand is holding a glass or a tool. That ease is a real plus at a bar sink, where space is often tight.
The 360-degree swivel adds reach across a small basin without moving the faucet body. It can help you aim water toward each corner, though it cannot fix a mismatch in hole count.
The mounting hole diameter is listed at 1.3 inches, so check that detail against your sink before ordering. A close look at the opening now can prevent a poor seat or a loose fit later.
APPASO Bar Sink Faucet 4 Inch Centerset: Best for standard 2-hole bar sinks
- Two handles
- 4-inch centers
- Fits 2- or 3-hole setups
- Brushed nickel stainless steel
APPASO is the most direct match for a two-hole bar sink. Its 4-inch centers, two handles and included mounting plate make it the clearest fit-focused choice here.
Pros
- Direct 2-hole fit
- 4-inch centers
- Mounting plate included
Cons
- Brushed nickel only
- No side sprayer
The APPASO Bar Sink Faucet 4 Inch Centerset is the best direct match for a 2-hole bar sink. Its two handles give separate hot and cold control, and the 4-inch center spacing matches a common compact faucet layout.
APPASO uses stainless steel construction with a spot-resistant brushed nickel finish. The faucet has a 180-degree swivel and an 8.6-in spout height, which leaves room for filling pitchers and washing bar tools.
The faucet supports 2- or 3-hole setups and includes a mounting plate, installation hardware and flexible supply lines. APPASO also identifies the faucet as NSF/ANSI/CAN 372 and NSF/ANSI/CAN 61 certified, lead-free certified and cUPC certified.
The removable aerator can be taken out for nozzle cleaning, which helps restore a steady stream when mineral buildup narrows the flow. Choose APPASO when fit is your main concern and you want two-handle control without a side sprayer.
The included mounting plate helps the faucet work across both two-hole and three-hole setups. The 180-degree swivel is less than a full turn, yet it still gives useful side-to-side movement at a compact bar sink.
Crea Kitchen Faucets with Pull Out Sprayer: Best for pull-out spray reach
- Pull-out sprayer
- Three spray modes
- 360-degree swivel
- 24-in flexible hoses
The pull-out sprayer gives this CREA useful rinse control, but the single-hole installation means it needs a different sink setup from a two-hole faucet.
Pros
- Stream, spray and pause modes
- 24-in hoses
- 360-degree swivel
Cons
- Single-hole design
- Not a direct 2-hole replacement
The Crea Kitchen Faucets with Pull Out Sprayer suits a single-hole bar or prep sink where you want more control over rinsing. Its pull-out sprayer offers stream, spray and pause modes for filling, rinsing and stopping water flow briefly.
The faucet is made from stainless steel with a brushed nickel finish. Its 360-degree swivel gives broad sink coverage, and the 24-in flexible hoses are already installed.
The single-handle design combines water flow and temperature control. CREA also describes the faucet as lead-free and says its ABS ceramic disc valve can help save 30% of water.
This faucet does not fit a standard two-hole layout without a suitable change to the mounting arrangement. Choose it for a new single-hole installation, especially if a pull-out spray head matters more than two-handle control.
The pause mode can be handy when you move a glass from one side to the other without resetting temperature. The pull-out head also lets you aim spray at corners and residue instead of relying only on the fixed spout stream.
The 24-in hose length gives useful reach, though you should still check cabinet space below. A hose that is too long for a tight space can kink or rub.
COMLLEN 2 Handle Kitchen Sink Faucet: Best for large-sink spray coverage
- Two handles
- Side sprayer
- High-arc 360-degree swivel spout
- Matte black finish
COMLLEN offers two-handle control, a side sprayer and a long reach, but its 4-hole layout makes it a poor direct match for a two-hole bar sink.
Pros
- Side sprayer
- Long 7.08-in reach
- Matte black finish
Cons
- Needs 4 holes
- Larger kitchen-faucet format
The COMLLEN 2 Handle Kitchen Sink Faucet is best for a wider sink where you need a side sprayer and long reach. Its 7.08-in spout reach and high-arc 360-degree swivel can cover more space than a compact bar faucet.
The faucet has a matte black finish, two handles and a side sprayer. Its stated overall height is 11.81 in, with an 8.27-in spout height.
COMLLEN designs this model for 4-hole installation, with a 2 gpm flow rate and a 20-in hose. The materials are listed as plastic and stainless steel.
It is not a direct match for a two-hole bar sink. Choose it only when the sink has four holes.
The long reach can help in a double sink or a large single basin. It lets the stream land farther from the faucet body.
The side sprayer adds control for corners that the spout alone may miss. That extra spray suits a full size kitchen or utility sink rather than a narrow bar basin.
The taller profile needs open space above the sink. Check shelves, cabinets and windows before ordering.
FORIOUS Matte Black Bathroom Faucet 1 Hole: Best for a two-pack
- Two faucets in the pack
- Lead-free 304 stainless steel
- 1.2 gpm flow rate
- Pop-up drains included
FORIOUS provides two matte black single-handle faucets and matching drains. The pack is useful for multiple sinks, but it does not directly replace a two-hole faucet.
Pros
- Two-faucet pack
- Matte black finish
- 360-degree swivel
Cons
- Single-hole design
- Bathroom-faucet format
The FORIOUS Matte Black Bathroom Faucet 1 Hole is best when you need two matching faucets rather than one two-hole replacement. The 2-pack includes two single-handle faucets, two pop-up drains, two 24-in hoses and instruction manuals.
Each faucet uses lead-free 304 stainless steel with a matte black finish. The 1.2 gpm aerator is designed to reduce water use and soften the flow, while the gooseneck spout swivels 360 degrees.
The included 6-in deck plate supports 1- or 3-hole, 4-in centerset sink setups. That still does not make this a direct two-hole faucet, so check the actual sink configuration before ordering.
Choose this pack for two compatible sink installations or a bathroom-style bar area. For one standard two-hole bar sink, APPASO is the more direct choice.
The two-pack makes sense when you are updating more than one basin at once. Matching faucets and drains can give a bathroom or bar area a clean, uniform look without mixing finishes.
The gooseneck shape gives a taller curve than a low spout, which can help with hand washing and filling small vessels. The 360-degree swivel also helps you angle the stream toward the center of the basin.
The aerator removal tool is a useful inclusion for care over time. It lets you clean the aerator when hard water starts to affect the stream, which helps keep the flow even.
RODDEX Bathroom Sink Faucets 4 Inch Center: Best for a bathroom-style 2-hole fit
- Two handles
- 4-inch centers
- Brushed nickel stainless steel
- 360-degree swivel
RODDEX is a direct two-hole, 4-inch-center option with a bathroom-oriented shape. Its high-arc swivel spout gives useful access for a vanity, bar or compact prep sink.
Pros
- Direct 2-hole fit
- 4-inch centers
- Two-handle control
Cons
- Bathroom-focused design
- No side sprayer
The RODDEX Bathroom Sink Faucets 4 Inch Center is the best bathroom-style option for a two-hole bar or vanity sink. Its two handles and 4-in centers match the basic layout many compact sinks use.
The faucet is made from stainless steel with a brushed nickel finish. Its high-arc spout swivels 360 degrees, reaches 5.12 in and stands 5.2 in high.
The two-handle design lets you adjust hot and cold water separately. RODDEX includes two water supply lines and installation hardware, and the faucet has a deck-mount centerset installation method.
This model is designed for bathroom settings, so its shape may look less like a kitchen prep faucet than APPASO or Friho. Pick it when your sink is compact and you want a direct two-hole fit with a clean brushed nickel finish.
The 5.2-in spout height is modest, so it suits a shallow or compact basin well. It may feel tight for tall pitchers, but it can work nicely for hand washing, glasses and everyday bar use.
The 360-degree swivel gives extra freedom to aim the stream across the basin. That movement can help in a small vanity where you cannot easily shift a glass from side to side.
The included supply lines and hardware help with a straightforward replacement. Still check the center measurement and the space below the sink before you order, since fit always comes first.
How do you measure for a 2 hole bar sink faucet?
Measure from the center of one mounting hole to the center of the other. A 4-in center measurement points to APPASO or RODDEX, while a different spacing may require another faucet.
Mark the center of each hole with painter tape first. That helps you avoid measuring from the edge of an opening.
Hole count alone is not enough to confirm fit. Two sinks can both have two holes yet use different spacing.
Also measure hole diameter and the space below the counter. Supply lines, mounting nuts and the sink cabinet can limit your options.
Clear the cabinet under the sink before measuring. Move cleaning supplies out of the way so you can see how lines will run.
Check for pipes or supports that may sit close to the holes. A faucet can match on top yet be hard to install if the space below is crowded.
Check faucet height against shelves, windows and cabinets. A high-arc model gives more room below the spout, but it also needs open space above the sink.
Measure basin depth as well, since a tall spout over a shallow sink can splash more. Write down each measurement before you shop.
Should you choose a two-handle or single-handle faucet?
Choose a two-handle faucet for separate hot and cold control and a direct two-hole installation. APPASO and RODDEX are the clearest matches in this roundup.
Two handles let you fine tune temperature in small steps. That can be useful with a small glass or a delicate rinse.
A single-handle faucet can be easier to adjust with one hand. CREA, Delta, FORIOUS and the other single-handle alternatives make more sense when the sink has one hole or can accept a deck plate.
Single lever control also suits a sink where you often hold an item in one hand. You can lift or lower the lever with the other hand.
Sprayers add another trade-off. Friho and COMLLEN offer side sprayers, while CREA offers a pull-out sprayer, and these features usually require a larger hole layout.
A side sprayer needs its own hole and a clear path below the sink. That layout can work in a utility sink, yet it may crowd a small bar cabinet.
A pull-out sprayer keeps controls in one place. The hose still needs room below, so check the cabinet before you choose that style.
How should you install and care for a two-hole faucet?
Turn off the water supply before removing the old faucet, then clean the mounting surface before fitting the new one. Keep supply lines straight and tighten connections securely without forcing the threads.
Lay out parts before you start so you can see if the plate, gasket and hardware are all present. That small check can save a second trip if a part is missing.
Seat the faucet so the spout faces the center of the basin, then tighten mounting hardware from below. Use steady pressure and stop when the faucet feels firm, since extra force can crack a ceramic basin.
After installation, open the water slowly and check every connection for drips. Run the water long enough to clear installation debris, following the faucet instructions.
Let the water run until it looks clear and the temperature feels steady at the tap. That flush helps remove grit from the lines.
Check the pop-up drain or sprayer at the same time if your model has one. Make sure it moves freely and sits level.
Wipe the finish with a soft cloth after use. Avoid harsh cleaners that can dull matte black or brushed finishes.
Check the aerator from time to time, especially if the stream starts to split or weaken. Cleaning it on schedule is simpler than waiting until the faucet feels hard to use.
Which 2 hole bar sink faucet should you buy?
Choose APPASO when you need the most direct two-hole match, 4-in centers, two handles and support for 2- or 3-hole setups. Choose RODDEX when a bathroom-style brushed nickel faucet suits the sink better.
Pick Friho or COMLLEN only when you have enough holes for a side sprayer. Choose Delta, CREA or FORIOUS when your sink uses a single-hole layout, and compare our best single hole bar sink faucets for more options.
For three-hole layouts, see the best three hole bar sink faucets. If you want a finish-focused shortlist, our guide to the best black bar sink faucet is the better next step.
Our top 3 picks at a glance
-
1
Best for a black 3-hole alternative
Ifaucet Black Bathroom Faucet 3 Hole
9.7/10 our score
See it on Amazon -
2
Best for a flexible black finish
Delta Modern Matte Black Single Hole Bar
9.6/10 our score
See it on Amazon -
3
Best for side-sprayer cleanup
Friho Kitchen Faucet with Side Sprayer
9.5/10 our score
See it on Amazon
Frequently asked questions
What is the best bar sink faucet 2 hole?
The APPASO Bar Sink Faucet 4 Inch Centerset is the best direct match in this roundup because it has two handles, 4-inch centers, stainless steel construction and support for 2- or 3-hole setups. RODDEX is another direct 2-hole option with a bathroom-style design.
Are 2-hole and 3-hole bar sink faucets interchangeable?
Not always. A two-hole faucet needs the correct hole spacing and mounting surface.
APPASO supports 2- or 3-hole setups with a mounting plate, while several other picks here need a single-hole, 3-hole or 4-hole configuration.
What does 4-inch centerset mean?
A 4-inch centerset faucet has mounting points spaced 4 inches from center to center. Measure between the centers of your sink holes before ordering, because a two-hole count alone does not confirm that the faucet will fit.
Should a bar sink faucet have one or two handles?
Choose two handles when you want separate hot and cold controls and a direct match for a two-hole sink. A single-handle faucet can be easier to adjust, but it normally needs a single-hole installation or a compatible deck plate.
